products

Single Phase Output 60 100KVA Industrial Online UPS (6) Single Phase Output 60 100KVA Industrial Online UPS (5)

CNI310 Series 10-100KVA 1Ph Industrial Online UPS

share

Facebook
LinkedIn

Model Number: CNI310 10-100KVA
Nominal Capacity: 10 – 100KVA
Nominal Voltage: 380/400/415VAC
Maximum Input Voltage Range: +-20%
Nominal Frequency: 50/60HZ

 

Typical Application Scenarios

  • Power industry: Power plant DCS control, boiler safety monitoring, turbine inspection, substation RTU, power carrier communication, power monitoring equipment
  • Petrochemical & energy: Oil & gas pipeline control, chemical production line instruments, mine automation system
  • Transportation: Railway signal, airport control, port monitoring, tunnel automation equipment
  • Industrial manufacturing: Precision testing instruments, automated production lines, emergency safety control equipment
  • Water treatment & new energy: Desalination control, photovoltaic/energy storage monitoring systems

Description
CNI310 series is a three-phase input, single-phase output industrial online double-conversion UPS ranging from 10kVA to 100kVA, independently developed by CONSNANT for harsh industrial and power industry scenarios.

Adopting full digital DSP control, industrial low-frequency isolation architecture and zero-switch static bypass technology, it delivers ultra-clean, stable single-phase 220/230/240V AC power for critical control loads. The whole machine reaches IP42 protection grade, with wide voltage adaptability, strong overload tolerance and complete multi-level protection, perfectly solving grid surge, voltage sag, harmonic interference and power failure risks in factories, power plants, petrochemical and transportation industries.

The system can be combined with independent bypass regulator cabinet and PDU distribution cabinet to form a complete industrial power supply solution, supporting lead-acid, nickel-cadmium and lithium battery matching, with customizable DC voltage (110/220/384VDC optional).

 

Core Advantages & Technical Features

  1. Online Double Conversion Topology, Zero Transfer Switch

    Full-time rectifier + inverter isolation power supply; static switch transfer time <1ms, no power interruption for loads during mains failure, battery discharge or inverter fault bypass switching.

  2. Industrial-Grade Isolation & Strong Grid Adaptability

    Built-in input & output isolation transformers; three-phase input 380/400/415VAC with ±20% wide voltage range, compatible with unstable industrial on-site power grid. Optional harmonic filter makes input THDi<5%, power factor up to 0.99.

  3. Excellent Load & Overload Capacity

    Rated output power factor 0.8; strong overload performance: 125% load sustainable for 10min, 150% for 1min, 200% instantaneous for 100ms, adapts to motor, instrument non-linear industrial loads.

  4. Comprehensive Full-Range Protection Mechanism

    Integrates over/under voltage, over current, short circuit, over temperature, battery over-discharge, phase loss, unbalanced load, bypass fault multi-protection logic; automatically switch to static bypass and trigger alarm signal under abnormal conditions to avoid load outage damage.

  5. Humanized Intelligent Monitoring System

    Large multi-language touch LCD (Chinese/English/Russian/French), real-time display input/output voltage, current, frequency, battery status, fault codes; stores 256 groups of historical event records for troubleshooting. Support RS485/Modbus communication for remote monitoring and DCS system docking.

  6. Harsh Environment Adaptability & Reliable Structure

    IP42 cabinet protection, operating temperature 0~40℃, humidity ≤95% non-condensing; redundant cooling fans with automatic speed regulation; RAL7035 industrial gray cabinet, forced ventilation, noise ≤65dBA at 1m distance.

  7. High Energy Efficiency & Flexible Configuration

    Smart ECO mode efficiency up to 98%; standard independent bypass cabinet, voltage stabilizer cabinet and power distribution cabinet expansion; battery voltage, backup time, cabinet size and communication functions fully customizable for project demands.

Production Pictures:

Single Phase Output 60 100KVA Industrial Online UPS (8)

 

Product service:
1. Pre-sales consultation; After-sales worry-free.
2. Support ODM and OEM.
3. Online guidance and Technical support.

 

Technical Parameters:

Model CNI310 10-100KVA
Rating(kVA)*@P.F.0.8 vs DC Rated Voltage
Nominal Power(kW) 8 12 16 24 32 40 48 64 80
110Vdc 10 15 20 30 – – – – –
220Vdc 10 15 20 30 40 50 60 80 100
384Vdc 10 15 20 30 40 50 60 80 100
Input
Input Voltage 380/400/415 Vac 3Phase±20%,50/60Hz±10%
Power Factor Up to 0.95,if increase harmonic filter can reach to 0.99
Input THDi <10%@rated load,if increase harmonic filter can<5%
Bypass Input Voltage 220/230/240 Vac 1Phase±25%,50/60Hz±15%
Battery
DC Voltage 110/220/384VDC  (Optional)
Battery Type Lead-acid,Ni-cd or Li-lon
Output
Nominal Voltage 220/230/240 Vac single phase
Frequency 50/60Hz(Adaptive),±0.05%Hz synchronization,±2Hz asynchronous
Voltage Regulation ±1%static;±5%dynamic;80%load change,<10 ms recovery
Overload Capacity 125%for 10 min;150%for 1 min;200%for 100ms
Harmonic Distortion THDv <2%linear load;<5%non-linear load
System
Cooling Forced ventilation and redundant fans
Color RAL 7035(standard),other optional
Protection Degree IP42(standard),other optional
Environmental
Operating Temperature -10℃ to 40℃(up to 55℃ with de-rating)/Storage:-20℃ to 70℃
Altitude <1000m(For places higher than 1000 meters,the output will be-1%of the nominal value for every 100 meters higher)
Audible Noise at 1 Meter (dBA) 65 to 75(Depending on rating and options)
User Interface
Front Panel Graphic display,minic LED panel,Running indicator,EPO optional
Connectivity Includes alarm relay card and RS485 interface
Standards Quality assurance,environment,health and safety:ISO 9001:2008,ISO 14001:2004,
BS OHSAS 18001:2007;Safety:IEC EN 62040-1;EMC:IEC EN 62040-2;
Environmental aspects:IEC EN 62040-4;
Test and performance:IEC EN 62040-3 VFI-SS-111;
Protection degree:IEC 60529;
Marking:CE

UPS Model List:

Model Capacity Nominal Voltage Battery Voltage Power   Factor W×DxH(mm) Weight    (KG)
CNI310 10KVA/8KW 380/400/415VAC 110/220/384VDC 0.8 600x800x1900 (2050) 327
15KVA/12KW 372
20KVA/16KW 418
30KVA/24KW 516
40KVA/32KW 620
60KVA/48KW 220/384VDC 800x800x1900 (2050) 720
80KVA/64KW 920
100KVA/80KW 1200x800x1900 (2050) 1070
CNI330 10KVA/8KW 380/400/415VAC 110/220/384VDC 0.8 600x800x1900 (2050) 300
15KVA/12KW 410
20KVA/16KW 445
30KVA/24KW 536
40KVA/32KW 650
60KVA/48KW 220/384VDC 800×800×1900 (2050) 758
80KVA/64KW 952
100KVA/80KW 1500×800×1900 (2050) 1100
120KVA/96KW 1200
160KVA/128KW 384VDC 1600x800x1900 (2050) 1428
200KVA/160KW 1902
300KVA/240KW 2000×850×1900 (2050) 2500
(PF=0.9 can be for option)
Single Phase Output 60 100KVA Industrial Online UPS (10)

Chemical factory in Kashgar City. Xingjiang

Single Phase Output 60 100KVA Industrial Online UPS (11)

Power Plant in Russia

Single Phase Output 60 100KVA Industrial Online UPS (9)

Shanxi Sinopec

Is isolation transformer built-in? What’s the advantage of industrial frequency isolation?
Built-in input & output isolation transformers. Advantages: isolate grid harmonic, surge, zero-sequence interference; prevent load reverse voltage impact on mains; safe to ground, lower equipment damage risk under lightning strike and grid fault.
What battery voltage options are available? Support lithium battery?
Standard DC voltage: 110VDC / 220VDC / 384VDC customizable. Compatible with lead-acid, Ni-Cd, lithium iron phosphate batteries, battery cabinet and backup time fully customized according to customer demand.
Daily regular maintenance items?
1) Clean cabinet dust, check fan running status; 2) Read battery voltage, avoid over-discharge; 3) Quarterly manual cut mains to test battery switching function; 4) Export historical fault records regularly for risk inspection.

Related products

Three‑Phase Isolation Transformer 3KVA‑3000KVAThree‑Phase Isolation Transformer 3KVA‑3000KVA
Three‑Phase Isolation Transformer 3KVA‑3000KVA
Three-Phase Autotransformer
Three‑Phase Autotransformer 10KVA‑1000KVA
Single‑Phase Transformer 1KVA‑200KVA
Single‑Phase Transformer 1KVA‑200KVA
512V 100Ah High-Voltage LiFePO4 Battery System
CNLP512100-H 512V 100A High Voltage Lithium Battery System Backup Power

Related Articles

48V DC Telecom Power System vs Outdoor UPS Which Backup Architecture Fits a Remote
48V DC Telecom Power System vs Outdoor UPS: Which Backup Architecture Fits a Remote Site?
CONSNANT Industrial UPS Load Schedule Review
How to Choose an Industrial UPS for a Manufacturing Plant
CONSNANT Petrochemical Project Industrial UPS Installation
Industrial UPS for Oil & Gas Projects: What Should Buyers Specify?
CONSNANT Industrial UPS Main and Bypass Cabinets
Industrial UPS Maintenance Bypass: When Should a Project Specify a Separate Bypass Cabinet?

Contact us

Partner with CONSNANT to find the perfect power system for your business. Our technical team is ready to provide customized solutions to optimize power usage and maximize efficiency.

Solution5 1